MX6 Food Grade Grease
Extreme pressure, fully synthetic, high temperature (no melt) food grade approved machinery grease with PTFE.
Product information
INOX-mx6 is a fully synthetic Extreme Pressure grease formulated to give premium performance and food grade purity.
This grease is composed entirely of ingredients which meet the requirements of section 178.3570 of the US FDA regulations and have been cleared for use within registered establishments by the US Department of Agriculture and will not deleteriously affect meat or meat products.
INOX-mx6 is a smooth light brown grease made with polyalphaolefins and a special bentone thickener. It contains additives to protect against corrosion and oxidation.
INOX-mx6 grease is recommended for all bearings and general lubrication and where processing temperatures go well below zero, especially in the refrigerated and frozen foods and beverage industries.
Key features
- INOX-MX6 IS FOOD GRADE APPROVED
- Australia: Instrument of Approval is available on request.
- New Zealand: NZFSA Approved C15 (All animal product except diary)
- KOSHER CERTIFICATE K-ID FML-QVTB Status Pavere
Application & Uses
INOX-mx6 grease has a temperature range of -30 °C to an extremely high temperature (HAS NO MELTING POINT).
PTFE – Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication to bearings, bushes, shafts, gears, chains, splines, couplings, winches, cables, universals, CV & ball joints.
INOX-mx6 is highly suitable for all BEARINGS, BUSHES, CHAINS, HINGES, SPROCKETS, SLIDES, SPLINES & COUPLINGS, UNIVERSALS AND BALL JOINTS used in all Food processing Machinery, Beverage Filling Lines, Food Conveyor Lines, Food Packaging Equipment, Ovens, Freezers and Cold Rooms.
INOX-mx6 also has a wide spread application outside of the food and beverage industry.
Because of it’s Extreme Pressure lubricating ability and NO MELT temperature range, INOX-mx6 is highly suitable for all bearings, bushes, universals, etc used in Bitumen Transporting and Laying Machinery, Foundries, Paint Baking Ovens and all other high temperature applications. INOX-mx6 is also highly suitable for Truck, Trailer and all Farm Machinery wheel bearings, universals & ball joints, splines & couplings, Tierod Ends, Winches and Trailer Couplings.
NB. INOX-mx6 is a premium grade clay based Extreme Pressure grease. Using it with a non-clay based grease can seriously affect its performance. Before using INOX-mx6 grease, it is advisable to remove other non-clay based greases by flushing or pushing out the old grease with INOX-mx6 in a grease gun.
INOX-mx6 EP Food Machinery Grease is available in 6 sizes:- 30 g Tube, 400 & 450 g Cartridges, 2.5 kg Tubs, 20 & 180 kg Drums
Technical Information
| TYPICAL TESTS | ASTM METHOD | |
| NLGI | 2 | |
| Appearance | Smooth, light brown | |
| Penetration at 25°C | D.217 | 265 min – 295 max |
| Worked, 60 Strokes | ||
| Dropping Point, °C | D.2265 | Does not melt |
| Lower Operating Temperature °C | – 30 | |
| Rust Prevention Rating | D.1743 | Pass |
| Timken, OK Load, Kg | D.2509 | 23 |
| 4-Ball Weld, Kgf | IP.239 | 500 |
| Base Oil, cSt at 40°C | D.445 | 46 |
| Base Oil, cSt at 100°C | D.445 | 7.8 |