MX5 Plus PTFE Lubricant

Extreme pressure lubrication, superior penetration, quality anti-corrosion protection with PTFE. Extreme pressure lubrication, quality anti-corrosion protection, superior penetration.

INOX mx5 Plus has been specially formulated by modifing the original INOX base formula together with the addition of a high grade friction modifier – Polytetrafluoroethylene.

INOX mx5 Plus has been designed for applications where a superior extreme pressure, anti-corrosion, anti-moisture liquid lubricant, a high grade penetrating oil or an industrial quality machine cutting lubricant is required (Safe to use in saw, lathe & milling reservoirs).

Key Features

INOX mx5 Plus will not harm metal points or surfaces, fibreglass, formica, painted or enamel finishes, plastics or neoprene seals.
INOX mx5 Plus will not become tacky, alter surface tolerances, dry out or wash off with water
INOX mx5 Plus is non-toxic, non-conductive, non-corrosive and non-staining.
Polytetrafluoroethylene (PTFE) is premium grade extreme pressure anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures.
Kosher Certificate K-ID DZH-PBQH Status Pavere
INOX mx5 Plus is Food Grade Approved (Type A) Australia
The Instrument of Approval is freely available on request and can be downloaded from the download site at the bottom of the INOX mx5 Plus MSDS page.
The Kosher Certificate can be downloaded from the same page.

Application & Uses

Cars & motorcycles: Starter motor, alternator, generator and solenoid shaft bushes – wiper motors and linkages – inner control cables – motorcycle clutch and accelerator cables (Ideal for classic/vintage heavy clutch cables)

Cold climate lubricant: Ski bindings and snow board clips – snow mobile tracks, door hinges, locks and control cables – chair lift cables (prevents icing) – cold storage door locks and hinges, helps prevent switches, solenoid and valves icing up.

Electrical: all electric motor bushes – solenoid shaft assemblies – relay and switch gear pivot point bushes.

Farming: Chain and sprocket drives – PTO splines and couplings – shearing hand pieces and equipment – control cables and linkages – winch cables – stock gate hinges and latches.

General: Pin bearings, bushes, screw & worm drives – slides & small linear bearings.

Hobbies: Model train engine bushes and gears, rolling stock wheels and track switching points – all moving parts for model sailing and power boats, model cars, slot cars and tracks and model planes

Industrial & mining: Electric and pneumatic power tools – punching, stamping and folding equipment – conveyor and pneumatic systems lubricators – cutting, drilling and thread tapping – release agent (ie plastics, metal, etc) – factory roller doors – underground pump motor bushes.

Marine & shipping : Sail tracks – door hinges and locks – sliding hatches and pulleys – control cables – winch cables – high speed sail and line winders – sea container hinges and latches

Recreational uses: All firearms – roller blades and skate boards – gym and sporting equipment – mountain and racing pushbike chains, cables and wheel bearing hubs

Truck, bus & trailer: Pneumatic door tracks and linkages – side curtain tracks alloy/stainless steel roller doors and tracks – air brake slack adjusters – inner control cables all starter motors, generators, alternators and wiper motors and all linkages, door hinges stock crate hinges and latches and any other application where an extreme pressure anti-corrosion liquid lubricant is required

Caution: INOX MX5 Plus may effect some natural rubber products with continual long term use (refer to LANOX)

INOX® QUALITY PRODUCTS “There is no substitute for Quality”

Technical Information

ASTM 1298	DENSITY @15.6°C	0.865
ASTM D97	POUR POINT	-13°C
ASTM D92	FIRE POINT	204°C
DIELECTRIC		33
ASTM D1744	KARL FISHER WATER	254.4 ppm
ASTM D445	VISCOSITY @ 40°C	10.86
	VISCOSITY @ 100°C	2.74
ASTM D2509	Timken, OK load Kg	20
ASTM IP239	4 – Ball Weld Test – Kgf	275